Im ordering nos tomorow and want to be sure.....
#1
Senior Member
Posts like a Corvette
Thread Starter
Im ordering nos tomorow and want to be sure.....
im ordering nos tomorow from dp.com and i wanted to be sure it would work. its the nx kit they are advertising on the fornt page. would this kit be safe. would i need to port a polish my heads to prevent detonation befroe installation. thanx
#2
Junior Member
Posts like a Ricer Type-R
2 things.....if you're gonna buy NOS from DP, it'* safe, or he wouldn't be selling it. Just follow the instructions.
And if you have specific application questions, Dr Jay and Allmachtige are our resident experts. Mach for the NA, Doc for the SC.
And if you have specific application questions, Dr Jay and Allmachtige are our resident experts. Mach for the NA, Doc for the SC.
#3
Senior Member
True Car Nut
Join Date: Sep 2002
Location: Genoa, Illinois
Posts: 4,013
Likes: 0
Received 0 Likes
on
0 Posts
Woah, I didn't know you were gonna jump into this so soon bud!
Well if you need any help feel free to take the few hour drive up here...I would love to install a wet NX kit on your car. But yes, talk to DrJay on the specifics with your L67.
Well if you need any help feel free to take the few hour drive up here...I would love to install a wet NX kit on your car. But yes, talk to DrJay on the specifics with your L67.
#5
Senior Member
Posts like a Corvette
Join Date: Oct 2002
Location: N.W. Indiana
Posts: 1,206
Likes: 0
Received 0 Likes
on
0 Posts
You really have til spring to put this on. This is one mod that you definently dont want to rush & slap on. Which will probably cost you more than you think to do it right.
#6
Senior Member
Posts like a Corvette
Thread Starter
Well like mach said im gunna have to have him help me out installing. Im not just gunna throw it on, but i want to order while i got the cash. Im still gunna ask around i just have to find someone to talk to about it thourly. Doc j if u rread this im usually on between 7 and 10 every night so be expecting an im or pm some time soon
#7
Senior Member
Certified GM nut
Join Date: Feb 2003
Location: Georgia
Posts: 2,095
Likes: 0
Received 0 Likes
on
0 Posts
Heeeeeyyyy.... Aight well honestly I'd be careful with that 2.2" pulley. At that level the delta temperatures are in excess of 250+degrees (2x normal) and introducing nitrous to it may not be so great an idea. Ever taken a glass plate out of the oven and put it in a bowl of ice? The other thing is to avoid spraying your MAF sensor. While not immediately damaging it uses whats called a "hot wire", in other words it heats up the element much like a lightbulb and checks the resistance at the other end. The flow of air over it changes the temp and hence the reading. Blasting cooollllddd nitrous over it will throw it into a tailspin. I wanted to add more but I have to run. Let me know if you have any questions, otherwise I'll check back in a day and add more.
#8
Senior Member
Posts like a Corvette
Thread Starter
im ordering nos friday as in last friday its an old post which means we need to talk, the pulley may have to go because its the least expensive of the two. please do whatever u can to get ahold of me and ill do the same for u
#9
Senior Member
Certified Car Nut
Whatever you do, don't cut corners. If you don't have the money, WAIT. I'd suggest the pulley before the Nitrous system.
You seen the meet next march? Check it out in my signature, and see if you can come btw.
You seen the meet next march? Check it out in my signature, and see if you can come btw.
#10
Senior Member
Posts like a Corvette
Thread Starter
deffinately not gunna cut any corners, i may wait till next year or so to put it on, but whenever i do it im not gunna do it alone and im going to do whatever i can to make it safe
Thread
Thread Starter
Forum
Replies
Last Post