Need car advice
#3
Hiya mom. On your car it might be different, but not necessarily more difficult. Ours fit in the stock locations......but it shouldn't be hard for you to find an appropriate spot. I'm not as familiar with your generation of Bville. You may want to look at a different shape than the typical round we use.
#4
Your original brackets will be hard to remove, try spraying the nuts and bolts down with pentrating oil over night to help free them up.
The wiring will be straight forward as your replacing the stock units, just ensure you have a good ground and tape up all your connections.
The wiring will be straight forward as your replacing the stock units, just ensure you have a good ground and tape up all your connections.
#5
Need a better picture of your headlight area ( cant resist a here ) to know for sure. I've never even seen a pre 92 with fog/driving lights.... They do make rectangular ones, tho, that may look better on your car
#9
Senior Member
True Car Nut
Joined: Dec 2002
Posts: 5,857
Likes: 0
From: Halifax, Canada 91SSE / 97SSEi
Yo....
Cyber White Navs... hrm... not sure how they mount up, but when I did my Angel Eyes I didn't remove the stock brackets.
SSE14, I believe you should easily be able to install those navs w/o major changes to the stock bracket. Unless they mount really funny.
Here'* a link to a bunch of photos when I had my Angel Eyes installed.
http://www.bonnevilleclub.com/forum/...ic.php?t=11920
I hope that helps...
If you're still confused, can you snap a few pix of your cyberwhites and the mounting pieces... and I'll try and figure out the best way to mount them. I always prefer to leave as much stock if possible, incase I ever want to go back to org.
Cyber White Navs... hrm... not sure how they mount up, but when I did my Angel Eyes I didn't remove the stock brackets.
SSE14, I believe you should easily be able to install those navs w/o major changes to the stock bracket. Unless they mount really funny.
Here'* a link to a bunch of photos when I had my Angel Eyes installed.
http://www.bonnevilleclub.com/forum/...ic.php?t=11920
I hope that helps...
If you're still confused, can you snap a few pix of your cyberwhites and the mounting pieces... and I'll try and figure out the best way to mount them. I always prefer to leave as much stock if possible, incase I ever want to go back to org.