Heated Seats
#22
Any wire that you are tapping to power, use a 10 amp fuse on each.
I got the power for each relay under the seat at the power seat wire. I think it'* like 10 gauge..maybe 5. Also go ground there.
That should leave you with only 1 wire to the switches that you need ignition power for. I already had run one...
I got the power for each relay under the seat at the power seat wire. I think it'* like 10 gauge..maybe 5. Also go ground there.
That should leave you with only 1 wire to the switches that you need ignition power for. I already had run one...
#28
I've done two sets now and it'* really just as easy as it seems. You have tested the pads to make sure they all work before putting them into the seats right?
Under each seat you hook up power and ground for the relay.
Then supply the switches with power and ground.
Switches hook to relays, relays hook to seat pads.
Under each seat you hook up power and ground for the relay.
Then supply the switches with power and ground.
Switches hook to relays, relays hook to seat pads.
Thread
Thread Starter
Forum
Replies
Last Post