1993 PCM help
#1
Senior Member
Certified Car Nut
Thread Starter
1993 PCM help
I need anyone that has the magic book to possibly answer my question. As you may know I bought an Air/Fuel gague and needs tapped into the o2 sensor...... well can anyone tell me what is the location (number) of the o2 sensor on the connector of the PCM??? I want to tap in there as apposed to running ANOTHER wire through the fire wall
#3
Senior Member
True Car Nut
CKT 412, PPL, BD3
Middle Connector (Black), Cell D2, Tan wire, 02S Ground
Middle Connector (Black), Cell D3, Purple wire, 02S Signal
If the green connector is to the left, the 02 signal is the third from the left on the top row.
6E3-A-11
Middle Connector (Black), Cell D2, Tan wire, 02S Ground
Middle Connector (Black), Cell D3, Purple wire, 02S Signal
If the green connector is to the left, the 02 signal is the third from the left on the top row.
6E3-A-11
#5
Senior Member
Certified Car Nut
Thread Starter
ok just want out to the car... and the wire that is in the 12 pin conector has no purple wire in #3 but the 16 pin connector has a purple wire in #3??
could you post or PM me the PCM connectors or just explain
thanks a bunch
could you post or PM me the PCM connectors or just explain
thanks a bunch
#6
Senior Member
True Car Nut
Originally Posted by Damemorder
CKT 412, PPL, BD3
Middle Connector (Black), Cell D2, Tan wire, 02S Ground
Middle Connector (Black), Cell D3, Purple wire, 02S Signal
If the green connector is to the left, the 02 signal is the third from the left on the top row.
Middle Connector (Black), Cell D2, Tan wire, 02S Ground
Middle Connector (Black), Cell D3, Purple wire, 02S Signal
If the green connector is to the left, the 02 signal is the third from the left on the top row.
And it'* the 32 pin black connector, versus the 24 pin one.