Washing, waxing, and polishing advice
#11
Senior Member
Posts like a Camaro
![Default](https://www.gmforum.com/images/icons/icon1.gif)
As was mentioned, you polish before you use wax or sealant. ScratchX is a decent one for use by hand. There are also some polishes by 1Z (sold online) that are supposed to be good for use by hand. Otherwise you are much better off buying a polisher to do polishing. It will be easier, and much quicker.
95SLE has a good process there for washing. Sol also hit it with the difference between wax and sealant. Collinite is one exception to the rule of short lasting waxes. I have 845 Insulator Wax on mine for over five months now. I think it is just about gone now, but it did a nice job. A common practice is to put a sealant on for the long protection, then let it cure for a day, and top with wax for the better look.
95SLE has a good process there for washing. Sol also hit it with the difference between wax and sealant. Collinite is one exception to the rule of short lasting waxes. I have 845 Insulator Wax on mine for over five months now. I think it is just about gone now, but it did a nice job. A common practice is to put a sealant on for the long protection, then let it cure for a day, and top with wax for the better look.
#12
Member
Posts like a V-Tak
Join Date: Mar 2006
Location: Lewis Center, Ohio
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
![HLB is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
I use windshield washer fluid on the glass. That is what you clean your windshield with and it is cheap. You can use any empty spray bottle as long as you rinse it out real good first.
#14
Senior Member
True Car Nut
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 1 Like
on
1 Post
![SSEimatt93 is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Originally Posted by HLB
I use windshield washer fluid on the glass. That is what you clean your windshield with and it is cheap. You can use any empty spray bottle as long as you rinse it out real good first.
All I would recommend is a good wash, dry, Clay bar, Polish, then wax afterward.
some polishes recommend that the car sit outside in the sun for a full day to allow it to "bake" Liquid glass is like that, IMO it is one of the better bangs for your buck.
![Cool](https://www.gmforum.com/gm/images/smilies/icon_cool.gif)
#15
Senior Member
True Car Nut
Join Date: Jun 2004
Location: Rochester, NY (college)
Posts: 6,182
Likes: 0
Received 0 Likes
on
0 Posts
![corvettecrazy is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
clay bar all your windows too. headlights, tail lights, etc. And when you are done with the car, do the wheels with it too. You must throw it away after the wheels though. You dont want to rub brake dust all over the car
#16
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Originally Posted by SSEimatt93
some polishes recommend that the car sit outside in the sun for a full day to allow it to "bake" Liquid glass is like that, IMO it is one of the better bangs for your buck. ![Cool](https://www.gmforum.com/gm/images/smilies/icon_cool.gif)
![Cool](https://www.gmforum.com/gm/images/smilies/icon_cool.gif)
However, let'* not confuse terms. LG isn't a polish since it'* not an abrasive. It says 'polish' on the can, but it'* really not. Just a sealant...
#17
Senior Member
Posts like a Camaro
![Default](https://www.gmforum.com/images/icons/icon1.gif)
And a tip on the clay bar: cut it into two or three pieces. You don't need a big piece, and it will make it easier to knead when you are looking for a clean surface on the clay. I cut mine into three pieces, and usually can do at least one car from one piece depending on how contaminated it is.
#19
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Mar 2007
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
![rae_man is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
thansk everyone! that is excellent advice! Now I can truly make everyone on the road jealous, and they will wonder where my great cleaning expertise came from
![Cool](https://www.gmforum.com/gm/images/smilies/icon_cool.gif)
#20
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Originally Posted by Grimm
And a tip on the clay bar: cut it into two or three pieces. You don't need a big piece, and it will make it easier to knead when you are looking for a clean surface on the clay. I cut mine into three pieces, and usually can do at least one car from one piece depending on how contaminated it is.