The Absorber
#11
Senior Member
True Car Nut
Join Date: Dec 2002
Location: Halifax, Canada 91SSE / 97SSEi
Posts: 5,857
Likes: 0
Received 0 Likes
on
0 Posts
I've tried both, and the absorber works awesome on the paint, but sometimes it tends to leave a "film" on the windows/mirrors. So I use the waterblade for that.
If I'm in a hurry, I use the waterblade, however if I'm taking my time I used the absorber on the paint and the waterblade on the windows.
When you use the absorber, you are using it when it'* moist or completely dry?
(it should be moist)
If I'm in a hurry, I use the waterblade, however if I'm taking my time I used the absorber on the paint and the waterblade on the windows.
When you use the absorber, you are using it when it'* moist or completely dry?
(it should be moist)
#12
Senior Member
True Car Nut
Join Date: Jun 2004
Location: Rochester, NY (college)
Posts: 6,182
Likes: 0
Received 0 Likes
on
0 Posts
I hated the absorber too. Mine found its way to the trash in a very short period of time.
A good chamois works damn well for me. As I will not drag a water blade across anyone'* paint.
A good chamois works damn well for me. As I will not drag a water blade across anyone'* paint.
#13
Senior Member
Certified Car Nut
The thing that never made sense to me is how you can easily use a waterblade on bumpy services, ie. the cladding (ESPECIALLY the grooved cladding on the 92-95), any other uneven surface, etc.
The absorber is basically a "cloth" so it forms to the car and you can dry the car quicker and more precise IMO. Just wring it out frequently and wipe the car until it'* dry. It really has worked great for me!
The absorber is basically a "cloth" so it forms to the car and you can dry the car quicker and more precise IMO. Just wring it out frequently and wipe the car until it'* dry. It really has worked great for me!
#14
Senior Member
True Car Nut
Join Date: Mar 2004
Location: Maryland, USA
Posts: 3,089
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by smellbird
I used to use the Absorber when it first came out, I never had problems with it other than getting smelly when forgot in the trunk on hot days. I eventually changed it up in favor of micro fiber towels, which, I must say I like much more.
#15
DINOSAURUS BOOSTUS
Expert Gearhead
I've got both and would say that the absorber works better once it has been wet for about 20 minutes from opening the package.
When I do repaint..I'll be talking to Tom daily and neither will touch my paint.
When I do repaint..I'll be talking to Tom daily and neither will touch my paint.
#17
Senior Member
Posts like a Turbo
Join Date: May 2007
Location: Northeast USA
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Gumball
sorry you dont like it Matt, But I have to disagree.
The Absorber works fantastic. I guess ya just have to know how to use it.
no way am I dragging a rubber blade across my paint.
The Absorber works fantastic. I guess ya just have to know how to use it.
no way am I dragging a rubber blade across my paint.
#18
Senior Member
Posts like a Supercharger
Join Date: Sep 2006
Location: Pittsburgh, PA
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
Secrets to using the absorber:
1) It HAS to be wet to work. If it'* not thoroughly wet first, it won't pick up. To wet it, hose it off till it'* dripping wet, or dunk it in clean water in a bucket. Then wring out and begin drying.
2) The car needs a good wax job. If your water doesn't bead well, the water may remain. It'* all physics here. Water is attracted to water. Water will "stick" to surfaces, like automotive paint. The higher the water bead stands up on the paint, the better the absorber will work as the water will be attracted to the water in the absorber instead of the water on the paint. (Wow, I hope that makes some sort of sense)
3) Don't use the absorber like a regular towel. Take the absorber by 2 adjacent corners and lay it on the car flat. Then lift up on the 2 corners and drag it towards you over the surface. It will pick up the water. If it'* too saturated, wring it out and do it again.
4) Wring out the absorber frequently. Give it all the strength you have. It'll feel close to dry, but just a tad damp. That'* when it picks up the most water.
5) When rinsing the car, allow the water from the hose to flow out the open end. Do not spray with a nozzle. The water will flood over the car in a uniform sheet. The water will begin to roll off the car. Since water is attracted to water, the water will pull off the vehicle with gravity and leave very little water behind. If done with the right flow (a light flow) you can "dry" entire panels by the water alone rolling off the car. Anyplace where the water sticks may either have a problem with embedded dirt in the paint, or acratches in the paint. The few water spots that may be left behind will come up quickly with the absorber used as described above. To do this, I use a brass ball valve on the end of the hose (from the garden center) and a 3 foot length og cut hose attached to the valve (like a laundry tub hose). This makes it easy to control water flow and the cut hose means no metal ends near the cars paint.
With a decently waxed car, the right rinse technique and the absorber, I've completely dried a car in under 10 minutes. Once you learn how the water rolls off your car, you can dry a car really fast.
I hope this helps, or even makes sense.
1) It HAS to be wet to work. If it'* not thoroughly wet first, it won't pick up. To wet it, hose it off till it'* dripping wet, or dunk it in clean water in a bucket. Then wring out and begin drying.
2) The car needs a good wax job. If your water doesn't bead well, the water may remain. It'* all physics here. Water is attracted to water. Water will "stick" to surfaces, like automotive paint. The higher the water bead stands up on the paint, the better the absorber will work as the water will be attracted to the water in the absorber instead of the water on the paint. (Wow, I hope that makes some sort of sense)
3) Don't use the absorber like a regular towel. Take the absorber by 2 adjacent corners and lay it on the car flat. Then lift up on the 2 corners and drag it towards you over the surface. It will pick up the water. If it'* too saturated, wring it out and do it again.
4) Wring out the absorber frequently. Give it all the strength you have. It'll feel close to dry, but just a tad damp. That'* when it picks up the most water.
5) When rinsing the car, allow the water from the hose to flow out the open end. Do not spray with a nozzle. The water will flood over the car in a uniform sheet. The water will begin to roll off the car. Since water is attracted to water, the water will pull off the vehicle with gravity and leave very little water behind. If done with the right flow (a light flow) you can "dry" entire panels by the water alone rolling off the car. Anyplace where the water sticks may either have a problem with embedded dirt in the paint, or acratches in the paint. The few water spots that may be left behind will come up quickly with the absorber used as described above. To do this, I use a brass ball valve on the end of the hose (from the garden center) and a 3 foot length og cut hose attached to the valve (like a laundry tub hose). This makes it easy to control water flow and the cut hose means no metal ends near the cars paint.
With a decently waxed car, the right rinse technique and the absorber, I've completely dried a car in under 10 minutes. Once you learn how the water rolls off your car, you can dry a car really fast.
I hope this helps, or even makes sense.
#19
Senior Member
Certified Car Nut
Had one or two about the same time smellbird did, i didn't like the fact that once dirt was in them, it was pretty hard to wash out. Not a fan of constant wringing it takes either.
I have a nice big MF towel just for drying now. Nothing will soak up as much water per sq/ft.
I have a nice big MF towel just for drying now. Nothing will soak up as much water per sq/ft.
Thread
Thread Starter
Forum
Replies
Last Post