Help Programing KeyFob GM 10246215
#1
Thread Starter
Senior Member
Posts like a Supercharger
Joined: Dec 2013
Posts: 176
Likes: 9
From: right now venezuela
Help Programing KeyFob GM 10246215
Hi, im trying to program a keyfob in an impala 2000, the model numer is GM 10246215.
i searched online and it looks like its not compatible with the impala, but im not sure.
thanks
i searched online and it looks like its not compatible with the impala, but im not sure.
thanks
#2
Give this a try...
To match the Transmitter:
-Scroll, using the SEEK up or down arrows, until FOB PROG appears on the display.
-Press the PREV or NEXT button to enter the submenu. The current selection will have an asterisk next to it. BEGIN will be displayed.
-Press the DISP button to start programming. When the message PUSH FOG flashes, press and hold the LOCK and UNLOCK buttons on the first transmitter at the same time for 15 seconds. A chime will be heard to verify the transmitter is learned.
-Repeat Step 3 for each additional transmitter.
The mode you selected is now set. You can either exit the programming mode by following the instructionsbelow or program the next feature available on your vehicle.
EXIT (Exit Feature Customization Mode): This feature allows you to exit the vehicle customization programming.To Exit:
-Scroll until EXIT appears on the display.
-Press the DISP button to exit programming. A chime will he heard to verify the exit.
-Scroll, using the SEEK up or down arrows, until FOB PROG appears on the display.
-Press the PREV or NEXT button to enter the submenu. The current selection will have an asterisk next to it. BEGIN will be displayed.
-Press the DISP button to start programming. When the message PUSH FOG flashes, press and hold the LOCK and UNLOCK buttons on the first transmitter at the same time for 15 seconds. A chime will be heard to verify the transmitter is learned.
-Repeat Step 3 for each additional transmitter.
The mode you selected is now set. You can either exit the programming mode by following the instructionsbelow or program the next feature available on your vehicle.
EXIT (Exit Feature Customization Mode): This feature allows you to exit the vehicle customization programming.To Exit:
-Scroll until EXIT appears on the display.
-Press the DISP button to exit programming. A chime will he heard to verify the exit.
__________________
Retired Administrator
Retired Administrator
#3
Thread Starter
Senior Member
Posts like a Supercharger
Joined: Dec 2013
Posts: 176
Likes: 9
From: right now venezuela
I did that, yesterday I programmed one using that method, but with this one you there'* no beep to confirm that it was pair with the car.
Looks like this model is not compatible with the impala, but is weird it looks identical, it says it works for Grand Prix 2000, Buick century 2000, but not impala, could it be that ?
Looks like this model is not compatible with the impala, but is weird it looks identical, it says it works for Grand Prix 2000, Buick century 2000, but not impala, could it be that ?
The following users liked this post:
Mike (07-11-2014)
#7
When replacing a fob, always match the number on the back of the old fob.....as you found out, they can look alike but if the P/N on the back doesn't match, it probably won't work....
Thread
Thread Starter
Forum
Replies
Last Post
radomirthegreat
Everything Electrical & Electronic
8
12-24-2007 12:45 AM