'00impy smoky startup
#1
Senior Member
Certified GM nut
Certified GM nut
Thread Starter
'00impy smoky startup
hey all. no clue what it is yet, but i figured id post a thread for when i do find out. impy has been sitting a hair over a week, and lauren has a class tomorrow. so i started it to go put gas in it. it started, but was missing. so i revved it a few times and it caught good. looked out the window and there is smoke everywhere. not white either. i cant decide if its oil or somehow an injector had leaked into a cylinder. i checked the coolant and oil as good as i could in the dark by flashlight, and the oil is good, but slightly low. coolant, i think is dark but i couldnt really tell for sure. friday (when lauren and i are both off) im gonna flush the coolant and see what happens to it.
im hoping its not the lim, but im not putting out of the realm of possibility.
im hoping its not the lim, but im not putting out of the realm of possibility.
#2
Senior Member
Certified GM nut
A flush would be a good start. Probably well overdue for one anyways. The darker looking coolant might just be from someone adding green stuff to the dex cool.
#3
Senior Member
True Car Nut
unfortunately if it hasent had the upper manifold changed and the lower gaskets changed its likely due. fortunately its not terribly expensive. i got the dorman upper kit, aluminum elbows, felpro gaskets, and some hoses from rockauto for like 150. figured if i do it all at once then i wont have to worry about it
#4
Senior Member
Certified GM nut
Certified GM nut
Thread Starter
any chance you can link me up with the part links? if her car goes smooth enough ill do my own.
#5
Senior Member
True Car Nut
RockAuto Parts Catalog[ID]=0&ck[idlist]=0&ck[viewcurrency]=USD&ck[PHP_SESSION_ID]=rr5eamktpfrbopst2h5knnm036
the upper comes with all the gaskets, i had to go get some more injector orings though, they had a bulk pack at autozone. the heater hoses arent on there but being a w-body not sure how they are or what not. i think the h goes to the pass side and it was a big pain. i think on a w it was more toward the middle
DORMAN Part # 615180 #89017272}
Designed Specifically to Work With Dorman OE Solutions Intake Manifold Gaskets Only; Upper; MFI A
$65.79 $65.79
FEL-PRO Part # MS98014T Intake Manifold Gasket Set PermaDryPlus®
2nd Design; w/Rubber-plastic end seals w/Locating pins; Lower set only; Upper set not incl.; PermaDryPlus® int. manifold gskts. incl.; MFI B
$48.79 $48.79 Radiator Lower HoseRelated Parts
DAYCO Part # 71700
Lower; Curved Radiator Hose; Cut to Fit B
$7.63 $7.63
Radiator Upper HoseRelated Parts
DAYCO Part # 71850 Type Single / Small ID 1.31" / Large ID 1.31" / Trunk Height 17"
Upper; Curved Radiator Hose B
$8.84 $8.84 :
Heater Hose FittingRelated Parts
DORMAN Part # 47065HP #12565082, 24503423} Elbow; Aluminum; w/O-ring Seal; Includes Upper & Lower Elbow
Aluminum Elbow w/O-ring Seal; Incl. Upper and Lower Elbow; Packaging Type: Card; MFI
https://www.gmforum.com/mechanical-134/l36-lim-uim-coolant-port-bypass-1995-2005-a-304071/
the upper comes with all the gaskets, i had to go get some more injector orings though, they had a bulk pack at autozone. the heater hoses arent on there but being a w-body not sure how they are or what not. i think the h goes to the pass side and it was a big pain. i think on a w it was more toward the middle
DORMAN Part # 615180 #89017272}
Designed Specifically to Work With Dorman OE Solutions Intake Manifold Gaskets Only; Upper; MFI A
$65.79 $65.79
FEL-PRO Part # MS98014T Intake Manifold Gasket Set PermaDryPlus®
2nd Design; w/Rubber-plastic end seals w/Locating pins; Lower set only; Upper set not incl.; PermaDryPlus® int. manifold gskts. incl.; MFI B
$48.79 $48.79 Radiator Lower HoseRelated Parts
DAYCO Part # 71700
Lower; Curved Radiator Hose; Cut to Fit B
$7.63 $7.63
Radiator Upper HoseRelated Parts
DAYCO Part # 71850 Type Single / Small ID 1.31" / Large ID 1.31" / Trunk Height 17"
Upper; Curved Radiator Hose B
$8.84 $8.84 :
Heater Hose FittingRelated Parts
DORMAN Part # 47065HP #12565082, 24503423} Elbow; Aluminum; w/O-ring Seal; Includes Upper & Lower Elbow
Aluminum Elbow w/O-ring Seal; Incl. Upper and Lower Elbow; Packaging Type: Card; MFI
https://www.gmforum.com/mechanical-134/l36-lim-uim-coolant-port-bypass-1995-2005-a-304071/
#6
Retired
Instead of LIM gasket for $48, goto Autozone and get the Felpro kit for $75. It contains more gaskets and seals than the $48 kit that you will need when you are rebuilding the top end.
Felpro/Intake Manifold Gasket (MS98014T) | AutoZone.com
Felpro/Intake Manifold Gasket (MS98014T) | AutoZone.com
__________________
Retired Administrator
Retired Administrator
#7
Senior Member
Posts like a Turbo
Instead of LIM gasket for $48, goto Autozone and get the Felpro kit for $75. It contains more gaskets and seals than the $48 kit that you will need when you are rebuilding the top end.
Felpro/Intake Manifold Gasket (MS98014T) | AutoZone.com
Felpro/Intake Manifold Gasket (MS98014T) | AutoZone.com
use promo code a124 and get 25 bucks off.. pick up at local store
#8
Retired
^ Or that too! Thanks for the info John.
__________________
Retired Administrator
Retired Administrator
#9
Senior Member
True Car Nut
the dorman manifold already come with everything from the lower manifold up, pre-assembled. except the 6 o-ring and that was only a few bucks for that variety pack. comes with the new design egr restricter things too
#10
Member
Posts like a V-Tak
the Fel-Pro has metal in the middle of the lower intake gasket, want to say copper. where the others may have plastic, or at least the OEM from GM had plastic.