scanners
The following users liked this post:
CathedralCub (10-23-2023)
10-23-2023, 10:53 PM
#2
Senior Member
True Car Nut
In your search you would do well to tell those you are asking the vehicle you have.
The following users liked this post:
CathedralCub (10-23-2023)
10-23-2023, 11:53 PM
#3
Senior Member
True Car Nut
Many folks post about a different vehicle than what they put in their profile. Is it the 2014 ATS in your profile or something else?
What is it doing wrong?
What is it doing wrong?
10-24-2023, 04:23 AM
#4
The following users liked this post:
CathedralCub (10-24-2023)
10-24-2023, 12:58 PM
#5
Senior Member
True Car Nut
I'd look at the relay and ignition switch first. You would need a factory scan tool to get any help for a no start. You may not be able to see the start request with a cheapo scanner.
The following users liked this post:
CathedralCub (10-24-2023)
10-24-2023, 11:28 PM
#6
Senior Member
True Car Nut
Yeah, check the relay before fiddling with complicated stuff.
The following users liked this post:
CathedralCub (10-25-2023)
10-25-2023, 10:41 PM
#8
Senior Member
True Car Nut
So you get nothing when bypassing the relay? If so, The wiring between the relay and stater has a problem. I would look at the underside of that fuse box. Make sure it'* clean.
The following users liked this post:
CathedralCub (10-25-2023)
Thread
Thread Starter
Forum
Replies
Last Post