PA Seats
#1
Senior Member
Posts like a Turbo
Thread Starter
PA Seats
Anybody kno if theres other seats that could possibly fit the PA!? I was told that the deville or seville seats were made a lil diff but could swap over! But before i hit a junk yard and pull some seats i wana be sure itll work!
My seat is comfortable but could be better.. I use to have a deville and it was way better.. "Comfort wise" i got a bad knee from playng football in highschool and after driving for so long its starts to bother me bad..
Or if not that, is there a way to make the seat go back a little more!?
My seat is comfortable but could be better.. I use to have a deville and it was way better.. "Comfort wise" i got a bad knee from playng football in highschool and after driving for so long its starts to bother me bad..
Or if not that, is there a way to make the seat go back a little more!?
#2
Senior Member
Shawn I am not sure if anything is quite as wide as The PA track. I suppose if you could remove your seat & measure the bolts distance & track width you would have a better idea at the JY. I know it may be possible to use a bracket extension by making or fab something up if you wanted to move the stock 97 seat back a bit. You could say where there is a will there is a way to mod the seats.
__________________
1997 Buick Pk Ave (Soft Ride) Suspension!
1997 Buick Pk Ave (Soft Ride) Suspension!
Last edited by Soft Ride; 10-29-2014 at 04:26 AM.
#3
Senior Member
Posts like a Turbo
Thread Starter
Agreed, ill wait till i have some time to pull the seat out and give it a good look and write down messurements n hopefully all goes well..
But i more than likely wont be able to mod it because im sure if hav to do some welding and im no good at that.. I dont even hav a welder lol..
But i more than likely wont be able to mod it because im sure if hav to do some welding and im no good at that.. I dont even hav a welder lol..
#4
Senior Member
Posts like a Turbo
I posted some info on the Deville seats I put in my Park Ave a few years back. Search on my name and PA seats and it should come up. I never regretted the swap.
The following 2 users liked this post by ssei98:
GunsOfNavarone (10-30-2014),
WilliamE (10-30-2014)
#5
Senior Member
Posts like a Turbo
Thread Starter
Thanks, i think i found it.. Is it the one with the seats out of a DTS? If so great job! Looks like it was alot of fabrication done for that to work! Idt im that handy lol
Thread
Thread Starter
Forum
Replies
Last Post