which felpro lim gasket number ?
#1
Senior Member
Posts like a Turbo
Thread Starter
which felpro lim gasket number ?
Ok i see two different ones
ms958091
ms98014t
which is the set I need for my 2000 lesabre and whats the diff between the two ?
ms958091
ms98014t
which is the set I need for my 2000 lesabre and whats the diff between the two ?
#2
Retired
Get these ones...ms98014t They are the metal framed gaskets that we encourage everyone to upgrade to.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
2011 Chevrolet Tahoe PPV
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
2011 Chevrolet Tahoe PPV
#4
Senior Member
True Car Nut
You already had a relevant thread going, where you had asked about this part number.
https://www.gmforum.com/buick-172/ch...-306778/page2/
RockAuto is usually the cheapest, I go with them or Amazon since I have a Prime account.
https://www.gmforum.com/buick-172/ch...-306778/page2/
RockAuto is usually the cheapest, I go with them or Amazon since I have a Prime account.
#5
Senior Member
Posts like a Turbo
Thread Starter
You already had a relevant thread going, where you had asked about this part number.
https://www.gmforum.com/buick-172/ch...-306778/page2/
RockAuto is usually the cheapest, I go with them or Amazon since I have a Prime account.
https://www.gmforum.com/buick-172/ch...-306778/page2/
RockAuto is usually the cheapest, I go with them or Amazon since I have a Prime account.
I just ordered all the parts from RockAuto...I have done the UIM before but never the lowers....thats why I figured for the price id hire him to do the whole thing....I guess I could do the whole job but.....
#6
Senior Member
True Car Nut
I couldnt find my other thread,,,I thought it was deleted or something...now I see it there....sometimes this computer ,,,,or me,,,,,has issues...
I just ordered all the parts from RockAuto...I have done the UIM before but never the lowers....thats why I figured for the price id hire him to do the whole thing....I guess I could do the whole job but.....
I just ordered all the parts from RockAuto...I have done the UIM before but never the lowers....thats why I figured for the price id hire him to do the whole thing....I guess I could do the whole job but.....
Thread
Thread Starter
Forum
Replies
Last Post
goldfinger22
Buick
10
02-27-2014 11:57 AM
Hans
Forced Induction
5
08-27-2007 07:11 PM
agrazela
Performance, Brainstorming & Tuning
11
04-20-2007 08:13 PM