CEL help please, EGR code ?
#26
Senior Member
Posts like a Turbo
Thread Starter
well i asked this ? before with never a straight answer wth is a pintel ?? I took it off and cleaned the bottom and the spring loaded device but nothing was real dirty ?? What am I looking for on the tube ?? If you can give some instructions that would help.
#28
Senior Member
Posts like a Turbo
Thread Starter
humm ok is it the spring loaded somewhat pointed item ?? If it is I did clean it and again nothing was very dirty. I will look the tube over but from what I see its fine...If so what then ??
#29
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 29 Likes
on
25 Posts
If your still getting codes, and you have checked everything, you may need to just replace the EGR. It'* a simple set up, a tube from the exhaust manifold, a valve controlled by a solenoid, and another tube going in to your lower intake manifold. I have a whole EGR setup here if your interested.
#30
Senior Member
Posts like a Turbo
Thread Starter
would i need the whole tube and all or just the egr ?? If my tube was bad would the light stay off a few months then come back on? How much would you want for one that you have ?? Thank you