98 Buick LeSabre 3.8L V6 - lower intake manifold
#11
Retired
![](https://www.gmforum.com/images/ranks/veteran_army.png)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
No you don't.
__________________
Retired Administrator
Retired Administrator
#12
Member
Posts like a V-Tak
Thread Starter
![Default](https://www.gmforum.com/images/icons/icon1.gif)
98 Buick LeSabre 3.8L V6
IT LIVES!
Thanks to everyone in the forum that answered my questions and steered me in the right direction.
IT LIVES!
Thanks to everyone in the forum that answered my questions and steered me in the right direction.
The following users liked this post:
CathedralCub (02-07-2018)
#13
Senior Member
![Default](https://www.gmforum.com/images/icons/icon1.gif)
With new UIM & LIM you should be good to go! Looks & sounds good!
I would run the engine normally for a few days, and then change the oil /filter again, just to be on the safe side.
Glad we could help!
I would run the engine normally for a few days, and then change the oil /filter again, just to be on the safe side.
Glad we could help!
__________________
1997 Buick Pk Ave (Soft Ride) Suspension!
1997 Buick Pk Ave (Soft Ride) Suspension!
![Smile](https://www.gmforum.com/gm/images/smilies/smile.gif)
The following users liked this post:
Tmille28 (02-02-2018)
#14
Senior Member
Posts like a Turbo
![Default](https://www.gmforum.com/images/icons/icon1.gif)
What people have forgotten to mention is that while you are looking at the intake for the coolant port you are not looking at the heads. There is no left and right heads; the heads can be used on either bank. So look at the coolant ports on the heads and you will have your answer.
Thread
Thread Starter
Forum
Replies
Last Post