97 buick lesabre custom
#3
Senior Member
![](https://www.gmforum.com/images/ranks/veteran_marine_corp.png)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
If it starts tap on the MAF sensor and if the engine stumbles or stalls the sensor is bad.
#6
Senior Member
![](https://www.gmforum.com/images/ranks/veteran_marine_corp.png)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Take and put your hand over the throttle body opening and have someone crank the engine. Should such hard on you hand. You could do a cranking vacuum test if you have a gauge.
#7
Member
Posts like a V-Tak
![Default](https://www.gmforum.com/images/icons/icon1.gif)
p0102 will not cause A not start you got either A fuel pump dead Or A crank sensor My Money is on the fuel pump that would be the two most common issues
#9
Senior Member
![](/images/badges/ASECertified.png)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Did you try starting with the MAF disconnected?
If that doesn't work, spray carb cleaner into the intake while some one cranks the vehicle......if it starts and runs as long as you spray, it'* fuel delivery....
If it still does not start, check for spark.....
If that doesn't work, spray carb cleaner into the intake while some one cranks the vehicle......if it starts and runs as long as you spray, it'* fuel delivery....
If it still does not start, check for spark.....
Last edited by Tech II; 02-15-2019 at 05:51 PM.
#10
Senior Member
![](https://www.gmforum.com/images/ranks/veteran_marine_corp.png)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Why not test for spark? If you have a tach see if the tach registers during crank, if so the crank sensor is OK. If you have spark and no start try spraying some alternative fuel into the throttle body and see if it starts.