2005 Buick Rendezvous power mirrors
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
2005 Buick Rendezvous power mirrors
Hi Guys,
Continuing the rehab of my 2005 3.6 Rendezvous. Now focused on my power mirrors. these are also heated. The motors are a little clunky / sticky. question is, how do you remove the mirror face on these so I can attend to the motors? I don't want to damage them.
Thanks,
Mark
Continuing the rehab of my 2005 3.6 Rendezvous. Now focused on my power mirrors. these are also heated. The motors are a little clunky / sticky. question is, how do you remove the mirror face on these so I can attend to the motors? I don't want to damage them.
Thanks,
Mark
The following users liked this post:
CathedralCub (06-04-2024)
#2
Senior Member
The following users liked this post:
CathedralCub (06-04-2024)
#3
Junior Member
Posts like a Ricer Type-R
Thread Starter
The following 2 users liked this post by mashux57:
carfixer007 (06-03-2024),
CathedralCub (06-04-2024)
#4
Senior Member
True Car Nut
It'* a 3.4 BTW.
It'* usually pretty easy to pop them out if you turn them all the way one way or another to where you can see the latches. The manual will definitely help.
#5
Junior Member
Posts like a Ricer Type-R
Thread Starter
Thanks for the insight, it'* kinda what I remember when doing something similar to a Montana. It is a 3.6 DOHC AWD by the way, an early High Feature V6, it was a bit of a beast when it was brand new. Still is but it only has the 4spd transmission; now 8 and 10 spds are common. I actually bought a Cadillac 3.6 emblem for the back gate.
The following users liked this post:
CathedralCub (06-05-2024)
#6
Senior Member
True Car Nut
I stand corrected! I just looked it up because I didn't know they put anything besides the 3.4 in there. A Rendezvous with a 3.6 would be nice! I can't believe they fit anything OHC in that bay. It was already tight with a pushrod engine.
Thread
Thread Starter
Forum
Replies
Last Post