02 buick century back glass replacement
03-23-2018 | 01:15 PM
#1
Thread Starter
Member
Posts like a V-Tak
Joined: Nov 2015
Posts: 39
Likes: 3
02 buick century back glass replacement
02 Buick Century
Back glass (rear windshield) broke, I picked up a used one and ready to replace it.
There is a seal/molding GM # 10427559, that wraps around the window and then the molding sits in the body.
Any tips for getting the rest of the glass out of the molding ?
Also, does the molding snap into the body, or is it urethaned ?
Thanks
Back glass (rear windshield) broke, I picked up a used one and ready to replace it.
There is a seal/molding GM # 10427559, that wraps around the window and then the molding sits in the body.
Any tips for getting the rest of the glass out of the molding ?
Also, does the molding snap into the body, or is it urethaned ?
Thanks
03-23-2018 | 04:22 PM
#2
Retired
Certified Car Nut
Joined: Jul 2003
Posts: 17,942
Likes: 1,804
From: Dark Side, AZ
Piano wire to cut the adhesive. You will need a super caulk gun with the proper adhesive to reseal the glass....
or better yet, call one of those glass companies that come out to you. Tell them you already have the glass and just get a quote on installation. Should be less than $100 for them to install it for you.
or better yet, call one of those glass companies that come out to you. Tell them you already have the glass and just get a quote on installation. Should be less than $100 for them to install it for you.
__________________
Retired Administrator
Retired Administrator
The following 2 users liked this post by Mike:
CathedralCub (03-28-2018),
Soft Ride (03-24-2018)
03-28-2018 | 02:14 PM
#5
Senior Member
True Car Nut
Joined: Feb 2015
Posts: 5,941
Likes: 931
From: Earth
The following users liked this post:
Mike (03-28-2018)
Thread
Thread Starter
Forum
Replies
Last Post
dsdphoto
Buick
0
11-02-2011 03:22 AM