99 Bonneville SE Front Door Speaker Installation - HELP
#11
rh9cg, i recently ordered some stuff from crutchfield, and they gave me master sheets for the bonneville, and one shows how to remove the door panel, it'* a little off on some parts, but it gives a good picture on what needs to come off
i scanned the page, if you would like a copy just pm me your email address and i can send it to you
i scanned the page, if you would like a copy just pm me your email address and i can send it to you
#12
the tweets are 1.5 and the speakers are 51/4 the door is a pain to get off without damaging clips take your time on your first try just to salvage as many as you can without ruining the teeth on em, there is a screw behind the light and on mine there is 1 under the arm rest and be careful of your lock switch if you have power locks i cracked one of mine and had to buy a new one hehe
#13
oh and i almost forgot the stock speaker harness wont work with any after market speakers i clipped mine with about an inch of wire left on the backs of them just in case i ever wanted to put the stockers back in for resale, but i would definatly solder the wires to the speakers because it gives them much better sound quality. and they wont fall off if you drive like me
Thread
Thread Starter
Forum
Replies
Last Post
02SpcGhst
Audio (and aftermarket electronics)
22
07-26-2009 10:22 PM
Pologuy
2000-2005
2
07-26-2008 06:52 PM
green95se
Audio (and aftermarket electronics)
9
01-30-2004 03:44 PM