Valve Cover Gasket Repalcement
#32
-- SITE DONATOR --
True Car Nut
Thread Starter
No rush. Just let me know when your ready.
Good to know. Hopefully the learning curve isn't to steep, but it'* always good to have a few people who have been through it before.
Good to know. Hopefully the learning curve isn't to steep, but it'* always good to have a few people who have been through it before.
#33
Senior Member
Posts like a Northstar
Join Date: Feb 2009
Location: Northern Illinois
Posts: 789
Likes: 0
Received 0 Likes
on
0 Posts
I have a little experience with general engine tuning so I should be good for most basic stuff. (MAF Tables, Shift Tables, Injector swaps and such)
#34
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 29 Likes
on
25 Posts
How good do you want it tuned? If your looking for the best tune possible, then get a wide band. If you just looking at a basic tune, you can get by without it.
There is a tone of information about tuning with HPT, when you get to that point, we will get you started.
There is a tone of information about tuning with HPT, when you get to that point, we will get you started.
#35
Senior Member
True Car Nut
I've got my wide band set up to go in at the 3" down tube. The wide band are equipped with an on-off switch, so you won't be running it all the time - only when you're tuning.
#36
Senior Member
Posts like a Northstar
Join Date: Feb 2009
Location: Northern Illinois
Posts: 789
Likes: 0
Received 0 Likes
on
0 Posts
I am thinking about the Aeroforce WBo2 kit. . .
Thread
Thread Starter
Forum
Replies
Last Post