Troque Spec, Front Calipers
#1
Troque Spec, Front Calipers
Need Help on torque spec on a 2001 Bonneville Brake Calipers and other brackets that hold calipers and pads. I have found that the wheel nuts are 100 foot /pounds and the calipers pins are 38 foot/pounds. But what are the torque spec for the two bolts that hold the bracket that holds the pads? These two bolts are the ones you have to remove to get the rotors off. I have looked many places with no luck. Your help is very thank full.
Koolie
Koolie
#2
Senior Member
True Car Nut
According to the 2000 FSM:
Front Brake Caliper Anchor Bracket Bolt 137 lb ft.
Front Brake Caliper Pin Bolt 63 lb ft.
Rear Brake Caliper Anchor Bracket Bolt 94 lb ft.
Rear Brake Caliper Pin Bolt 20 lb ft.
Front Brake Caliper Anchor Bracket Bolt 137 lb ft.
Front Brake Caliper Pin Bolt 63 lb ft.
Rear Brake Caliper Anchor Bracket Bolt 94 lb ft.
Rear Brake Caliper Pin Bolt 20 lb ft.
Thread
Thread Starter
Forum
Replies
Last Post
cballweg
Performance, Brainstorming & Tuning
9
01-28-2009 08:13 PM
goldfinger22
1992-1999
4
04-20-2008 07:33 PM