Skip Shift with Stock PCM
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Aug 2002
Location: New Jersey
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Skip Shift with Stock PCM
Does anyone know if the stock pcm should shift from 4th to 2nd at WOT? I was playing around tonight. I noticed if I was in 4th at like 50-60MPH and when WOT it would downshift and rev ~5000RPM by 80MPH. This is with 3.05 gear ratio.
I am assuming I was in 4th. I had the car in drive while cruising, and shift to 3rd which gave me a slight jump in RPM. I then put it back to drive and when WOT. I also took it to about 80MPH and shifted from drive to 3rd with brough the rpms from 2000RPM to like 3000RPM.
I didn't have the autotap on so cant be sure of exact gear ratios or sequence. But this seems like a skipshift or at least quick double down shift.
So does the PCM do this (2002 SSEi)?
My mods are 3.25P, TOG Headers, Thrasher CAI, 1.8 SLP Rockers, and 18X8.5 wheels.
I am assuming I was in 4th. I had the car in drive while cruising, and shift to 3rd which gave me a slight jump in RPM. I then put it back to drive and when WOT. I also took it to about 80MPH and shifted from drive to 3rd with brough the rpms from 2000RPM to like 3000RPM.
I didn't have the autotap on so cant be sure of exact gear ratios or sequence. But this seems like a skipshift or at least quick double down shift.
So does the PCM do this (2002 SSEi)?
My mods are 3.25P, TOG Headers, Thrasher CAI, 1.8 SLP Rockers, and 18X8.5 wheels.
Thread
Thread Starter
Forum
Replies
Last Post
CraZyDriVer868
Performance, Brainstorming & Tuning
16
10-18-2003 08:15 PM