LIM again....
#11
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 29 Likes
on
25 Posts
Those clips are there just to keep the line on if the fuel line clamp fails.
As for the vacuum lines, I bought a roll of mixed sizes from autozone and made all my own.
As for the vacuum lines, I bought a roll of mixed sizes from autozone and made all my own.
#12
Member
Posts like a V-Tak
Thread Starter
Join Date: Aug 2009
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
#14
Senior Member
True Car Nut
#15
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 29 Likes
on
25 Posts
Ahh, your talking about the fuel injector plug clip. Sorry, thought you were talking about the fuel line clip.
Like purple said, flush out ALL the pink before you add the green, if you don't, you will have black sludge.
Like purple said, flush out ALL the pink before you add the green, if you don't, you will have black sludge.
#17
Member
Posts like a V-Tak
Thread Starter
Join Date: Aug 2009
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
I needed a pulley also so I bought the clip on-line at RockAuto. I was going to hunt one down but it is too easy to find a cheap price on-line... The serpentine tensioner was a good price as I got the AC Delco tensioner for $15. Also, just got the upgraded rotors and Ceramic pads from R-1 Concepts. I was sick of the stock rotors warping and heard the R-1 concepts rotors work pretty well. That should do it for my upgrades this year.....
Thread
Thread Starter
Forum
Replies
Last Post