EGR blocking
#12
Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2003
Location: Round Rock, TX
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Alright I finally got to fixing my EGR valve. Or so I thought. I unhooked the EGR valve at the exhaust manifold removed the steel flange that holds the tube to the manifold. I had that welded shut put it back on so I do not have any exhaust leaks. I next took a small filter and routed a hose from the inlet tube of my EGR to the filter. I still have the SES light, and now it seems my car is in "limp mode". Will this go away if I have the light reset? Any help would be great.
#13
Senior Member
True Car Nut
Although I am not sure exactly what you are saying I think I understand and if it is as you say it is there should be no problem. But limp mode will go away when the problem is fixed even if the light is still on, so it still has the problem. If you weren't so damn far away (I am in Michigan) I would check what the code is and try to figure out what the problem is, but that can't be done unless you are planning on coming to MI any time soon. It would really help if you could just get me a picture of what you did to the EGR so I can see if I can figure out what the problem is. DO NOT TAKE THE CAR TO THE DEALER! You disabled the EGR, they are not going to like that. Please get some pics, I can help you better with pics. The only thing I can think of is you screwed up the exhaust or something and that cause the PCM to switch to limp mode, it doesn't seem like the EGR could do that but I guess it could.
#14
Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2003
Location: Round Rock, TX
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
EGR SES
It was running fine when I had the EGR blocked, and it was getting no airflow. I just got an SES light, but the car ran fine. I did take it to the dealer and had them read the code. The code read that the EGR flow was insufficient. I had it reset, and it came back on about one minute later I did not even get out of the parking lot. That was when I had the EGR blocked at the exhaust manifold with the EGR getting no airflow. Following your instructions (not blaming you) I blocked the EGR port at the exhaust manifold and left the EGR tube open to the outside world with a filter of course. The car still has the SES light but now runs like shi... the tranny gets into high gears quicker, and it has almost no power. I just assume "limp mode". Anyway I will get the best pics I can, and post them for you tonight.
#15
It was running fine when I had the EGR blocked, and it was getting no airflow. I just got an SES light, but the car ran fine. I did take it to the dealer and had them read the code. The code read that the EGR flow was insufficient. I had it reset, and it came back on about one minute later I did not even get out of the parking lot. That was when I had the EGR blocked at the exhaust manifold with the EGR getting no airflow. Following your instructions (not blaming you) I blocked the EGR port at the exhaust manifold and left the EGR tube open to the outside world with a filter of course. The car still has the SES light but now runs like shi... the tranny gets into high gears quicker, and it has almost no power. I just assume "limp mode". Anyway I will get the best pics I can, and post them for you tonight.
What performance gains are you hoping to achieve :?: Sounds like you are creating a disaster.
#16
Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2003
Location: Round Rock, TX
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Alright alright I feel like a dumb a!&. I was going to take the pics for you when I noticed the nut that holds the tube onthe intake side of the EGR was loose. I tightened it up it is running fine now. I took it to have the SES reset drove it for about a half hour and no light. I will post my pics anyway though. Wait how do you do that?
#17
Senior Member
True Car Nut
Alright alright I feel like a dumb a!&. I was going to take the pics for you when I noticed the nut that holds the tube onthe intake side of the EGR was loose. I tightened it up it is running fine now. I took it to have the SES reset drove it for about a half hour and no light. I will post my pics anyway though. Wait how do you do that?
Shudder. I don't understand why you are messing with that.
What performance gains are you hoping to achieve Sounds like you are creating a disaster.
What performance gains are you hoping to achieve Sounds like you are creating a disaster.
#18
There is nothing wrong with leaving it in, as it won't hurt performance KR wise because it is closed under WOT, but it does make everything filthy, and dirt can restrict airflow, and after time that will cause you power loss, but it would take a bit of dirt. We plan on leaving it in the SSEi. If you don't have an Intercooler it isn't very necessary, but just basically helps to keep things clean.
If I ever get an intercooler I will do it too.
ZZP says it reduces mileage by 1 mpg which isn't too bad..a good trade off for not having to tear down the top end to clean as often.
Thanks.
#19
Senior Member
True Car Nut
ZZP says it reduces mileage by 1 mpg which isn't too bad..a good trade off for not having to tear down the top end to clean as often.
Thanks.
#20
Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2003
Location: Round Rock, TX
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
EGR Blocking
I guess I should explain my whole reasoning behind blocking my EGR. It all started in back in 1977 Just kidding it all did start after reading a free mod article on ZZP; I believe; talking about how the TB gasket can sometimes hang out into the air path and cause a smaller hole, and not to mention turbulence. Any way I was checking that out. I looked at the back of my TB and inside my blower, and it was nasty black. I wondered for a minute what would cause this, as all that is passing through there is air. Then I realized it was the EGR; so I was determined at that time to block it. I tell you I do not have an IC nor do I hope to gain any realizable HP. But you cannot tell me that the hot unfiltered exhaust gas entering into my SC helps anything. Not to mention what are the supposed benifits of EGR anyway? On my car it is only sampling the #6 cylinder. Anyway thanks for all the help it is running great now that I fixed my little screw up.