WooHoo! No more ringy-dingy noises from the front end! PICS!
#94
Senior Member
Posts like a Camaro
Join Date: Nov 2002
Location: Ottawa,Can
Posts: 1,038
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jwikoff99
It'* time. So I do this with the wheels on? Kinda limits my work space.
#97
Senior Member
Certified Car Nut
Well I did the fronts. Driver side was easy because I got a quarter turn on and the old bolt twisted off. Tapped it out. The passenger side was more difficult. It had been replaced at some time, the bolt was smaller and a lot rustier. Had to use the recipricating saw to get it off. When it was lying on the ground, the portions of the bolts that were between bushings looked like two more days of driving would have snapped them. AND THE SPACER IN THE MIDDLE WAS THREADED AND THE BOLT WAS THREADED ALL THE WAY!! Who did that botch job, I don't know. The rears will be later when my new bolts arrive and I find my lug nut socket.
#98
Senior Member
Posts like a Camaro
Join Date: Nov 2002
Location: Ottawa,Can
Posts: 1,038
Likes: 0
Received 0 Likes
on
0 Posts
My fronts came off easy,studs where rust free and clean,Maybe there where replaced before by previous owner.On my rear'* I had to pull out my mini butane torch for drivers side and heat up the nut a little ,then she came off with ease .
#99
Junior Member
Posts like a Ricer Type-R
Originally Posted by jwikoff99
Well I did the fronts. Driver side was easy because I got a quarter turn on and the old bolt twisted off. Tapped it out. The passenger side was more difficult. It had been replaced at some time, the bolt was smaller and a lot rustier. Had to use the recipricating saw to get it off. When it was lying on the ground, the portions of the bolts that were between bushings looked like two more days of driving would have snapped them. AND THE SPACER IN THE MIDDLE WAS THREADED AND THE BOLT WAS THREADED ALL THE WAY!! Who did that botch job, I don't know. The rears will be later when my new bolts arrive and I find my lug nut socket.
#100
Senior Member
Certified Car Nut
Hmm, the duralast sway bar end links came today. The rubber bushings that came with them say RAMCOA, just like the ones from my driver side. Maybe they were a replacement. I'll use the washers a bushings from the Energy kit regardless. The bolt and nut that came with, I'm still trying to decide if they are a rust resistant metal or not. They're not black, they are very shiny, a little blue tint to them, especially in the threads. Sound like a rust proof coating of some kind? I'm pretty sure they are not stainless steel. The bolt shoulder is not long enough to have the third bushing completely off the threads. About 75% of the bushing will be exposed to threads. That pic I had from Napa is very representative of the kit.
I'd get stock bolts if I were ever near a dealership when the parts department is open.
I'd get stock bolts if I were ever near a dealership when the parts department is open.