What was Pontiac thinking?
#1
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jan 2004
Location: Montréal, QC
Posts: 1,374
Likes: 0
Received 0 Likes
on
0 Posts
What was Pontiac thinking?
Wow, I've seen some pretty poor examples of engineering before but Pontiac has just topped it.
I was going to attempt to change the SC idler pulley that'* tucked in behind the Torque Axis front engine on my Series II L67 - OMG is all I can say. Look at the picture below and then read the service proceedure below the photo;
This is unbelievable. It would take many hours of work to perform what should be a simple procedure. What'* more, this pulley is plastic so it'* not like it'* never going to fail. This has to be one of the dumbest things I've seen on a recent model car.
Cheers,
I was going to attempt to change the SC idler pulley that'* tucked in behind the Torque Axis front engine on my Series II L67 - OMG is all I can say. Look at the picture below and then read the service proceedure below the photo;
This is unbelievable. It would take many hours of work to perform what should be a simple procedure. What'* more, this pulley is plastic so it'* not like it'* never going to fail. This has to be one of the dumbest things I've seen on a recent model car.
Cheers,
#3
Senior Member
True Car Nut
Join Date: May 2002
Location: Edmonton, AB Canada
Posts: 2,621
Likes: 0
Received 0 Likes
on
0 Posts
Both are common examples of how to "stuff" things under the hood! Look at the Transports, etc that have the WSW Fluid Rez sitting right above the battery! Last thing I remember in electronics was H2O & Electricity didn't mix too well together, or did I fall asleep through that lesson?
#4
Senior Member
Posts like a Camaro
heh... during one of my stints at a dealership, i watched the service men argue over who had to work on a vette... you wanna see how to stuff things under a hood, look no further - on the 4th gen, you had to either remove a body panel or an engine compartment brace (didn't track down what it was actually bracing) to change the battery...
matt
matt
#6
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jan 2004
Location: Montréal, QC
Posts: 1,374
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1992 trofeo
What are you attempting to do?
Cheers,
#7
Senior Member
Posts like a 4 Banger
If you really want to see the "what were they thinking" effect take a look at a 3.4 DOHC motor. That thing was the ultimate example of stuffing an engine into its compartment. To change an alternator in my GTP I had to pull the front passenger wheel.
#8
Senior Member
Posts like a 4 Banger
Join Date: Dec 2002
Location: New Jersey, USA
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
I'm a big fan of GM cars, but sometimes I have to wonder if the engineers ever use their own products. Center console cup holder, anyone? My roommate and I were discussing this once (my cupholder is broken, and the one on his dad'* Olds 88 had broken also).
If any other car manufacturer discovered in the R&D process that the cupholders were prone to breaking, they would say, "oh, let'* beef up the cupholders."
GM would say: "Looks like we need to manufacture another 50,000 cupholders."
If any other car manufacturer discovered in the R&D process that the cupholders were prone to breaking, they would say, "oh, let'* beef up the cupholders."
GM would say: "Looks like we need to manufacture another 50,000 cupholders."
#9
Senior Member
Certified Car Nut
My cupholer hasn't broken (yet, knock on wood), but if you put anything in it, it'* right in the way of the shifter. And the ones in the door are worthles in my opinion. Any cup I have, that will fit, just tips over as soon as you move the car...
#10
Senior Member
True Car Nut
Join Date: May 2002
Location: Edmonton, AB Canada
Posts: 2,621
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by StoopidSavant
I'm a big fan of GM cars, but sometimes I have to wonder if the engineers ever use their own products. Center console cup holder, anyone? My roommate and I were discussing this once (my cupholder is broken, and the one on his dad'* Olds 88 had broken also).
If any other car manufacturer discovered in the R&D process that the cupholders were prone to breaking, they would say, "oh, let'* beef up the cupholders."
GM would say: "Looks like we need to manufacture another 50,000 cupholders."
If any other car manufacturer discovered in the R&D process that the cupholders were prone to breaking, they would say, "oh, let'* beef up the cupholders."
GM would say: "Looks like we need to manufacture another 50,000 cupholders."