Sway-bar link bushings on a 96' vs 95' and earlier
#1
Thread Starter
Member
Posts like a V-Tak
Joined: Oct 2003
Posts: 82
Likes: 0
From: Hawthorn Woods, Il (By Mundelein, Lake Zurich)
Sway-bar link bushings on a 96' vs 95' and earlier
Anybody know if the Energy bushing kits would fit on my 96 (details in sig)? I'm not sure which suspension code I have, aside from knowing that I do have the air struts in back, but that wouldn't affect the front suspension anyways...?
Basically, what I need to know is whether or not these will fit my car :
http://www.bonnevilleclub.com/forum/...light=bushings
http://www.bonnevilleclub.com/forum/...light=bushings
and if not, does anybody know of any bushings that will?
Thanks all
Basically, what I need to know is whether or not these will fit my car :
http://www.bonnevilleclub.com/forum/...light=bushings
http://www.bonnevilleclub.com/forum/...light=bushings
and if not, does anybody know of any bushings that will?
Thanks all
#3
Jason is right, all the same. Read this before doing the work too.....lot'* of advice and tips to make it go easier, and pics of all the stuff you need:
http://www.bonnevilleclub.com/forum/...pic.php?t=5791
http://www.bonnevilleclub.com/forum/...pic.php?t=5791
#4
Thread Starter
Member
Posts like a V-Tak
Joined: Oct 2003
Posts: 82
Likes: 0
From: Hawthorn Woods, Il (By Mundelein, Lake Zurich)
Wow, that'* a relief. Autozone carries these? Any idea how much?
Again, thanks for all the help. I have to say this board has more helpful ppl than just about any board i've ever been on
Again, thanks for all the help. I have to say this board has more helpful ppl than just about any board i've ever been on
#5
Originally Posted by evilsaint
Wow, that'* a relief. Autozone carries these? Any idea how much?
Again, thanks for all the help. I have to say this board has more helpful ppl than just about any board i've ever been on
Again, thanks for all the help. I have to say this board has more helpful ppl than just about any board i've ever been on
Yep, Autozone has them for around $20 I believe. Very inexpensive considering the life you should get out of them, and a DIY job for almost anyone with the patience to get the old, rusty endlink bolts out.
#6
Thread Starter
Member
Posts like a V-Tak
Joined: Oct 2003
Posts: 82
Likes: 0
From: Hawthorn Woods, Il (By Mundelein, Lake Zurich)
I'm having a shop put in my new struts for me, so I figure that i'll have them put these in too, as long as they're at it. I love working on my own car, but something about doing suspension parts has always bothered me...
#9
Originally Posted by BonneMeMN
We had to get a grinder out for the rear ones on my car. :?
Those suckers were rusted tight.
Those suckers were rusted tight.