So... Who can diagnose by scantool freeze frames?
#1
Thread Starter
Senior Member
True Car Nut
Joined: Nov 2002
Posts: 6,042
Likes: 2
From: Texarkana, Texas
So... Who can diagnose by scantool freeze frames?
I have no idea what any of this means... But Dad got me an Actron CP9110 for my birthday and it got here today. I "Read Codes" and got 26, QDM A. I can make that set again by playing with my fan switches, Kinda cool... But then I did the "View data" thingy, And I bet these are the numbers people use...
Here'* the best idle it'* had in months:
Codes Present, No
2nd Gear SW, OFF
3rd Gear SW, OFF
4th Gear SW, OFF
AC Clutch, OFF
AC Enabled, NO
AC Head Press, NORM
AC Press SW, OFF
AC Request, OFF
Battery (V), 13.4
LT Fuel Trim, 141
LT Fuel TR CC, 5
CC Brake SW, ON
CC On/Off SW, OFF
CC RES/ACC SW, OFF
CC Servo (%), 0
CC Set (MPH), 0
CC SET/CST SW, OFF
CC SRVO REQ, 0
CC Vacuum SOL, OFF
CC Vent SOL, OFF
Evap Duty (%), 0
Evap Solenoid, OFF
Coolant (*F), 86
Coolant SW, OFF
EGR SOL 1, OFF
EGR SOL 2, OFF
EGR SOL 3, OFF
KS Counter, 1
Exhaust O2, RICH
IAC Position, 83
Idle REQ RPM, 1163
ST Fuel Trim, 128
Knock RET (*), 0
Loop Status, OPEN
MAF (GR/SEC), 2476
IAT (*F), 77
O2S (MV), 955
O2S CROSSCNTS, 0
PNP Switch, P/N
PRNDL Switch (*F, 113
PROM ID, 1744
Quad Driver 1, BAD
Quad Driver 2, OK
Run Time, 00:16
Spark ADV (*), 9
TCC Applied, NO
TCC Brake SW, ON
TCC Duty CYC (%), 0
TCC Lockup, NO
TCC Slip RPM, 255
TCC Solenoid, OFF
Throttle (%), 0
TPS Sensor (V), 0.41
VEHSPEED (MPH), 0
And here'* a quick WOT frame on my street:
Codes Present, No
2nd Gear SW, OFF
3rd Gear SW, OFF
4th Gear SW, OFF
AC Clutch, OFF
AC Enabled, NO
AC Head Press, NORM
AC Press SW, OFF
AC Request, OFF
Battery (V), 13.1
LT Fuel Trim, 148
LT Fuel TR CC, 9
CC Brake SW, OFF
CC On/Off SW, OFF
CC RES/ACC SW, OFF
CC Servo (%), 0
CC Set (MPH), 0
CC SET/CST SW, OFF
CC SRVO REQ, 0
CC Vacuum SOL, OFF
CC Vent SOL, OFF
Evap Duty (%), 0
Evap Solenoid, OFF
Coolant (*F), 134
Coolant SW, OFF
EGR SOL 1, OFF
EGR SOL 2, OFF
EGR SOL 3, OFF
KS Counter, 3
Exhaust O2, LEAN
IAC Position, 107
Idle REQ RPM, 788
ST Fuel Trim, 128
Knock RET (*), 0
Loop Status, CLSD
MAF (GR/SEC), 13055
IAT (*F), 84
O2S (MV), 18
O2S CROSSCNTS, 3
PNP Switch, R/DL
PRNDL Switch (*F, 248
PROM ID, 1744
Quad Driver 1, OK
Quad Driver 2, OK
Run Time, 03:34
Spark ADV (*), 24
TCC Applied, NO
TCC Brake SW, OFF
TCC Duty CYC (%), 0
TCC Lockup, NO
TCC Slip RPM, 247
TCC Solenoid, OFF
Throttle (%), 100
TPS Sensor (V), 4.35
VEHSPEED (MPH), 13
So... Why does my car lope at idle, almost like it has a mild cam. And why does it suck off the line? And is there anything about to break that I should be replacing soon?
Here'* the best idle it'* had in months:
Codes Present, No
2nd Gear SW, OFF
3rd Gear SW, OFF
4th Gear SW, OFF
AC Clutch, OFF
AC Enabled, NO
AC Head Press, NORM
AC Press SW, OFF
AC Request, OFF
Battery (V), 13.4
LT Fuel Trim, 141
LT Fuel TR CC, 5
CC Brake SW, ON
CC On/Off SW, OFF
CC RES/ACC SW, OFF
CC Servo (%), 0
CC Set (MPH), 0
CC SET/CST SW, OFF
CC SRVO REQ, 0
CC Vacuum SOL, OFF
CC Vent SOL, OFF
Evap Duty (%), 0
Evap Solenoid, OFF
Coolant (*F), 86
Coolant SW, OFF
EGR SOL 1, OFF
EGR SOL 2, OFF
EGR SOL 3, OFF
KS Counter, 1
Exhaust O2, RICH
IAC Position, 83
Idle REQ RPM, 1163
ST Fuel Trim, 128
Knock RET (*), 0
Loop Status, OPEN
MAF (GR/SEC), 2476
IAT (*F), 77
O2S (MV), 955
O2S CROSSCNTS, 0
PNP Switch, P/N
PRNDL Switch (*F, 113
PROM ID, 1744
Quad Driver 1, BAD
Quad Driver 2, OK
Run Time, 00:16
Spark ADV (*), 9
TCC Applied, NO
TCC Brake SW, ON
TCC Duty CYC (%), 0
TCC Lockup, NO
TCC Slip RPM, 255
TCC Solenoid, OFF
Throttle (%), 0
TPS Sensor (V), 0.41
VEHSPEED (MPH), 0
And here'* a quick WOT frame on my street:
Codes Present, No
2nd Gear SW, OFF
3rd Gear SW, OFF
4th Gear SW, OFF
AC Clutch, OFF
AC Enabled, NO
AC Head Press, NORM
AC Press SW, OFF
AC Request, OFF
Battery (V), 13.1
LT Fuel Trim, 148
LT Fuel TR CC, 9
CC Brake SW, OFF
CC On/Off SW, OFF
CC RES/ACC SW, OFF
CC Servo (%), 0
CC Set (MPH), 0
CC SET/CST SW, OFF
CC SRVO REQ, 0
CC Vacuum SOL, OFF
CC Vent SOL, OFF
Evap Duty (%), 0
Evap Solenoid, OFF
Coolant (*F), 134
Coolant SW, OFF
EGR SOL 1, OFF
EGR SOL 2, OFF
EGR SOL 3, OFF
KS Counter, 3
Exhaust O2, LEAN
IAC Position, 107
Idle REQ RPM, 788
ST Fuel Trim, 128
Knock RET (*), 0
Loop Status, CLSD
MAF (GR/SEC), 13055
IAT (*F), 84
O2S (MV), 18
O2S CROSSCNTS, 3
PNP Switch, R/DL
PRNDL Switch (*F, 248
PROM ID, 1744
Quad Driver 1, OK
Quad Driver 2, OK
Run Time, 03:34
Spark ADV (*), 24
TCC Applied, NO
TCC Brake SW, OFF
TCC Duty CYC (%), 0
TCC Lockup, NO
TCC Slip RPM, 247
TCC Solenoid, OFF
Throttle (%), 100
TPS Sensor (V), 4.35
VEHSPEED (MPH), 13
So... Why does my car lope at idle, almost like it has a mild cam. And why does it suck off the line? And is there anything about to break that I should be replacing soon?
#4
In neither frame was your car warmed up, but the second one was closer. At least it was in closed loop.
Try a snapshot at idle when it reaches operating temp. Otherwise, everything looks normal at first glance.
Try a snapshot at idle when it reaches operating temp. Otherwise, everything looks normal at first glance.
#5
Thread Starter
Senior Member
True Car Nut
Joined: Nov 2002
Posts: 6,042
Likes: 2
From: Texarkana, Texas
Codes Present, No
2nd Gear SW, OFF
3rd Gear SW, OFF
4th Gear SW, OFF
AC Clutch, OFF
AC Enabled, NO
AC Head Press, NORM
AC Press SW, OFF
AC Request, OFF
Battery (V), 13 - 13.4
LT Fuel Trim, 115
LT Fuel TR CC, 0
CC Brake SW, ON
CC On/Off SW, OFF
CC RES/ACC SW, OFF
CC Servo (%), 0
CC Set (MPH), 0
CC SET/CST SW, OFF
CC SRVO REQ, 0
CC Vacuum SOL, OFF
CC Vent SOL, OFF
Evap Duty (%), 25
Evap Solenoid, ON
Coolant (*F), 205 (forgot to turn fans on)
Coolant SW, ON
EGR SOL 1, OFF
EGR SOL 2, OFF
EGR SOL 3, OFF
KS Counter, 0
Exhaust O2, Keeps changing
IAC Position, 60
Idle REQ RPM, 788
ST Fuel Trim, 126-132
Knock RET (*), 0
Loop Status, CLSD
MAF (GR/SEC), 1864 - 1891
IAT (*F), 158
O2S (MV), 186 - 781
O2S CROSSCNTS, Counts up to 9, Resets to 2
PNP Switch, P/N
PRNDL Switch (*F, 113
PROM ID, 1744
Quad Driver 1, BAD
Quad Driver 2, OK
Run Time, 15 minutes
Spark ADV (*), 4-7
TCC Applied, NO
TCC Brake SW, ON
TCC Duty CYC (%), 0
TCC Lockup, NO
TCC Slip RPM, 255
TCC Solenoid, OFF
Throttle (%), 0
TPS Sensor (V), 0.41
VEHSPEED (MPH), 0
Better? My sister went to sleep so there'* noone to hit "enter When I want it to Freeze data, No more motion runs tonight....
2nd Gear SW, OFF
3rd Gear SW, OFF
4th Gear SW, OFF
AC Clutch, OFF
AC Enabled, NO
AC Head Press, NORM
AC Press SW, OFF
AC Request, OFF
Battery (V), 13 - 13.4
LT Fuel Trim, 115
LT Fuel TR CC, 0
CC Brake SW, ON
CC On/Off SW, OFF
CC RES/ACC SW, OFF
CC Servo (%), 0
CC Set (MPH), 0
CC SET/CST SW, OFF
CC SRVO REQ, 0
CC Vacuum SOL, OFF
CC Vent SOL, OFF
Evap Duty (%), 25
Evap Solenoid, ON
Coolant (*F), 205 (forgot to turn fans on)
Coolant SW, ON
EGR SOL 1, OFF
EGR SOL 2, OFF
EGR SOL 3, OFF
KS Counter, 0
Exhaust O2, Keeps changing
IAC Position, 60
Idle REQ RPM, 788
ST Fuel Trim, 126-132
Knock RET (*), 0
Loop Status, CLSD
MAF (GR/SEC), 1864 - 1891
IAT (*F), 158
O2S (MV), 186 - 781
O2S CROSSCNTS, Counts up to 9, Resets to 2
PNP Switch, P/N
PRNDL Switch (*F, 113
PROM ID, 1744
Quad Driver 1, BAD
Quad Driver 2, OK
Run Time, 15 minutes
Spark ADV (*), 4-7
TCC Applied, NO
TCC Brake SW, ON
TCC Duty CYC (%), 0
TCC Lockup, NO
TCC Slip RPM, 255
TCC Solenoid, OFF
Throttle (%), 0
TPS Sensor (V), 0.41
VEHSPEED (MPH), 0
Better? My sister went to sleep so there'* noone to hit "enter When I want it to Freeze data, No more motion runs tonight....
#6
Exhaust O2 changing rapidly between rich and lean indicates correct AFR.
Idle RPM'* are where they should be.
IAT is a bit high. Need to work on that
You don't get a QDM fault with the brake on? Don and I both do with the same tool. Does on DrJay'* car with mine, too.
Idle RPM'* are where they should be.
IAT is a bit high. Need to work on that
You don't get a QDM fault with the brake on? Don and I both do with the same tool. Does on DrJay'* car with mine, too.
#7
Thread Starter
Senior Member
True Car Nut
Joined: Nov 2002
Posts: 6,042
Likes: 2
From: Texarkana, Texas
Originally Posted by willwren
You don't get a QDM fault with the brake on? Don and I both do with the same tool. Does on DrJay'* car with mine, too.
#9
Thread Starter
Senior Member
True Car Nut
Joined: Nov 2002
Posts: 6,042
Likes: 2
From: Texarkana, Texas
Originally Posted by BonneMeMN
Hey dame, kinda side note, did you ever get that Serial Cable to work?
Heh, I got over 22K MAF at 50MPH, This should be fun to test.....
#10
Thread Starter
Senior Member
True Car Nut
Joined: Nov 2002
Posts: 6,042
Likes: 2
From: Texarkana, Texas
So.... What do all these numbers mean? And what should they be?
It think LT and ST trim must Long Term and Short term fuel trim, But is that number a percentage? That'* how much it'* increased the injector duty cycle right? I've seen ST over 180....
The Gear SW'* seem to show what gear I'm in, That'* cool, there' the A/C and CC stuff, that'* useless... Evap duty is pretty obvious, but what'* it supposed to be? It seems to like to stick around 25-30. Coolant SW? what'* that used for? EGR solenoids are another obvious one, But when should they be on? KS counter? huh? osS crosscounts? KR? Spark adv? What should I be seeing here?
It think LT and ST trim must Long Term and Short term fuel trim, But is that number a percentage? That'* how much it'* increased the injector duty cycle right? I've seen ST over 180....
The Gear SW'* seem to show what gear I'm in, That'* cool, there' the A/C and CC stuff, that'* useless... Evap duty is pretty obvious, but what'* it supposed to be? It seems to like to stick around 25-30. Coolant SW? what'* that used for? EGR solenoids are another obvious one, But when should they be on? KS counter? huh? osS crosscounts? KR? Spark adv? What should I be seeing here?