Over sized tensioner pulley
#1
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 29 Likes
on
25 Posts
Over sized tensioner pulley
Just put a over sized tensioner pulley on my SC belt, it looks to be a 3.625". There is VERY little gap between the belts where they pass. I can fit a .006 feeler gauge threw, but a .008 I can feel rub. Shoudl it be that close, or is something not right?
#3
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 29 Likes
on
25 Posts
Originally Posted by harofreak00
most people do a 3.5" oversize pulley.
Here'* before I removed it.
Then I put it back on and here'* what I had
Looks a bit better, have no idea why the difference. Checked the belt and didn't see anything wrong.
#5
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 29 Likes
on
25 Posts
Originally Posted by harofreak00
Have you ran the car yet? That will set the tensioner where it will be. What belt are you running?
Thread
Thread Starter
Forum
Replies
Last Post
rel3rd
Performance, Brainstorming & Tuning
15
06-30-2005 12:20 PM