Intermittent Driver Information on Dash Panel on 93 SSEi
#11
Senior Member
True Car Nut
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Originally Posted by TrueWildMan
Originally Posted by acg_ssei
Whatever... YMMV, of course.
Huh??
![Blue Twitch](https://www.gmforum.com/gm/images/smilies/eek8.gif)
"Yo Mama'* Main Vehicle"?? Is that close?
![Cool](https://www.gmforum.com/gm/images/smilies/icon_cool.gif)
Your Mileage May Vary.
![Wink](https://www.gmforum.com/gm/images/smilies/icon_wink.gif)
#12
RIP
True Car Nut
![Default](https://www.gmforum.com/images/icons/icon1.gif)
A friend'* 93 SSE had a similair problem, except the symptom was that only the speedo and tach contiued working. Cleaning the contacts didn't work in that case either. The problem was poor solder connections. I re-soldered most of the connections on the boards, but I believe the problem was the soldered connection to the to the spring contacts that connect the boards together. Just be careful with the amount of heat you apply - you don't want to lift the circuit board traces. I used a 800 degree themperature controlled soldering pencil. A 30 watt pencil simliar to what you'd get at Radio Shack wasn't hot enough. It'* been working for about 9 months now.
Thread
Thread Starter
Forum
Replies
Last Post
jachin
Everything Electrical & Electronic
34
01-27-2010 11:44 PM
BlackGXP
Bonneville GXP/ Northstar Powered Cars
1
06-25-2009 01:22 PM