Fuel line splice
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2007
Location: NorthWest WI
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
![Lee_Mur is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
shop said they wouldn't be willing to splice in a new fuel line going to my fuel filter. My old school mind says cut out a foot or two and connect the new line piece to the old one with a gas rated rubber hose and O' ring clamps. The shop guy says there is 40 lbs. pressure on the line and it would leak . Do I really have to replace the whole line from the motor to the filter? All the lines down there are rusted pretty good in that small vertical spot in front of the rear tire.
#4
![Default](https://www.gmforum.com/images/icons/icon1.gif)
If anything, use HIGH pressure compression fittings. I used standard ones by accident on my '94 Century, and it blew off shortly after fixing it. Scared the crap out of me.
Also, splicing in a rubber hose is never a good idea. Overtime the rubber will crack and expand, and bust open.
Also, splicing in a rubber hose is never a good idea. Overtime the rubber will crack and expand, and bust open.
![Shocked](https://www.gmforum.com/gm/images/smilies/icon_eek.gif)
#6
Senior Member
True Car Nut
Join Date: Jan 2006
Location: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Posts: 8,029
Likes: 0
Received 0 Likes
on
0 Posts
![bandit is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Originally Posted by BillBoost37
It is possible to use compression fittings. I have seen that more than once as the filter area of our cars is prone to rusting lines.
![Cool](https://www.gmforum.com/gm/images/smilies/icon_cool.gif)
#7
Junior Member
Posts like a Ricer Type-R
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Originally Posted by Darrel
is there really 40 psi in that fuel line? for some reason i thought it was 15... i have the SAME problem (we found out at the MI meet). Not sure what i'm going to do about it yet though.
#9
Senior Member
Posts like a 4 Banger
Join Date: Jul 2007
Location: burlington,mass
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
![irish91983 is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
i spliced a new rubber hose in to mine right under my passenger side door. I havent had any problems. But should i change the whole line? And all my fuel lines are rubber from fuel filter to the tank. I dont think it came like that.
#10
Senior Member
True Car Nut
Join Date: Sep 2006
Location: Bloomington, MN
Posts: 3,693
Likes: 0
Received 0 Likes
on
0 Posts
![GoldenBullet is on a distinguished road](https://www.gmforum.com/images/reputation/reputation_pos.gif)
![Default](https://www.gmforum.com/images/icons/icon1.gif)
personally, the only time i would splice with a piece of rubber hose would be if it were a very temporary fix until i can get to a shop etc. but thats jmo.