Cracked rubber in the torque strut mount
#1
Thread Starter
Senior Member
Certified GM nut
Joined: Mar 2005
Posts: 2,284
Likes: 17
From: New Milford, CT
Cracked rubber in the torque strut mount
While under my car for an oil change, I noticed that the rubber in my torque strut mount is badly cracked. (The picture shows how dirty it is, but not the cracked rubber.)
I don't notice any new issues while driving, but because it'* only $9 at RockAuto, I'm thinking I should just replace it. Is it a difficult swap?
I don't notice any new issues while driving, but because it'* only $9 at RockAuto, I'm thinking I should just replace it. Is it a difficult swap?
#2
I would replace it ASAP. Can't tell you how difficult it would be since I've never owned that year Bonneville myself, but a broken mount will put unnecessary stress on the remaining good mounts, and can cause other problems as well due to the excessive engine movement in the engine bay.
#4
The pictured dogbone is held in by two bolts. IIRC they are both 15mm'* or 13mm'*. It'* actually a very easy swap.
Oil and grime will degrade and break down rubber BTW. So it'* a nice thing to keep the engine bay clean.
Oil and grime will degrade and break down rubber BTW. So it'* a nice thing to keep the engine bay clean.
#5
Thread Starter
Senior Member
Certified GM nut
Joined: Mar 2005
Posts: 2,284
Likes: 17
From: New Milford, CT
That picture you posted is for a torque axis mount. That one seems to be quite intact and not leaking. The one that'* breaking is the torque strut mount, which is down near the oil filter.
Not that I don't like visiting you, but is this something I could do on my own (i.e., without an engine lift)?
The top half of my engine gets cleaner every day, thanks to my recent discovery of brake parts cleaner. My transmission case is so shiny now, you'd think I finally replaced it. Bottom half is next on my "I'm bored today" list.
The top half of my engine gets cleaner every day, thanks to my recent discovery of brake parts cleaner. My transmission case is so shiny now, you'd think I finally replaced it. Bottom half is next on my "I'm bored today" list.
#7
Thread Starter
Senior Member
Certified GM nut
Joined: Mar 2005
Posts: 2,284
Likes: 17
From: New Milford, CT
#9
Thread Starter
Senior Member
Certified GM nut
Joined: Mar 2005
Posts: 2,284
Likes: 17
From: New Milford, CT