Coil packs on 97
#1
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Oct 2002
Location: Watertown, Wisconsin
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Coil packs on 97
How do I test the coil packs, to make sure they are working correctly?
I have a digital multimeter i can borrow from work...
I'm replacing my car'* plugs and wires, hoping to get rid of the vibrations and hesitation.
Coil packs too if they are bad.
-Daron
I have a digital multimeter i can borrow from work...
I'm replacing my car'* plugs and wires, hoping to get rid of the vibrations and hesitation.
Coil packs too if they are bad.
-Daron
#2
Junior Member
Posts like a Ricer Type-R
You'll have to remove them from the car to test them.
Check resistance between the primary coils. I should be between 0.5 and 0.9 ohms. The secondaries should be between 5k and 8k.
Here'* the pinout for secondaries......on the top (plug wire terminals) read 1-4, 5-2, and 3-6. Easy?
Primaries can be read from underneath.
Check resistance between the primary coils. I should be between 0.5 and 0.9 ohms. The secondaries should be between 5k and 8k.
Here'* the pinout for secondaries......on the top (plug wire terminals) read 1-4, 5-2, and 3-6. Easy?
Primaries can be read from underneath.
Thread
Thread Starter
Forum
Replies
Last Post
parallelcircuits
General GM Chat
3
05-15-2003 04:05 PM