95 Bonneville with starting/ running issues
#111
Retired
Are you looking for the chrome oval piece that surrounds the honeycomb grill in the hood?
__________________
Retired Administrator
Retired Administrator
#112
Member
Posts like a V-Tak
Thread Starter
Yeah, mine is missing that chrome piece, but the honeycomb part is also missing a big chunk on one side. So at least I have the chrome now,
Meal@Bar&Grill.com
Meal@Bar&Grill.com
#113
Retired
I think I still have a 95 chrome oval out in the garage....
__________________
Retired Administrator
Retired Administrator
#114
Retired
Is this the piece your looking for?
__________________
Retired Administrator
Retired Administrator
#116
Retired
Okie dokie.
__________________
Retired Administrator
Retired Administrator
#118
Retired
No need for the engine cover during the summer months. It just traps in too much heat.
__________________
Retired Administrator
Retired Administrator
#119
Member
Posts like a V-Tak
Thread Starter
Yeah but it looks WAY COOL and I am now in marketing mode...$$$...oh yeah; while my car was getting smogged the guru said he thinks what'* causing the serpentine belt squeal is the tentioner is a bit sprung to one side...since I cannot figure anything else out, I will probably take a crack at swapping it out. Looking at that mounting, I'm not sure what'* going on there. Is that some kind of rubber grommet? Am I looking at a several hour job there? It will actually tear up the belt given enough time, and it sounds terrible, so if I can I should take care of it. That'* what tore up the crank sensor in the first place,
Mealnogle
Mealnogle
#120
Senior Member
True Car Nut
the tensioner assembly is one of the only jobs that some stupid engineer really f'd up. you have to take it all apart and the coolant elbow has to be picked out of the assembly and the lower intake after it breaks coming out. you need to order the aluminum one before you start so you can use that one to put back in. on the back is another o ring i think i have never actually changed just the tensioner. i got the elbows because i was doing the lower intake gaskets
i put part numbers and pics here;
https://www.gmforum.com/mechanical-1...2005-a-304071/
i put part numbers and pics here;
https://www.gmforum.com/mechanical-1...2005-a-304071/