3.8 Litre Fuel Leak, Danger! Please Help!
01-11-2007, 01:23 PM
#11
Senior Member
Posts like a Northstar
Join Date: Dec 2006
Location: Niagara Region, ON, Canada
Posts: 635
Likes: 0
Received 0 Likes
on
0 Posts
Mike:
Just a question: Did you tell the hardware store they were for fuel?
If they supplied EPDM type o-rings, the fuel will break down the material, and you will have leaks again.
I work for Bosch Rexroth (yes, sort of the same Bosch that makes parts our cars don't like, only I work for the hydraulics division) and I've seen first hand what catastrophies the wrong type of o-ring can cause.
Viton or Buna will be fine. You might want to call the hardware store and make sure they did NOT supply EPDM.
Sincerely,
"Lord of the O-Rings",
Adam
Just a question: Did you tell the hardware store they were for fuel?
If they supplied EPDM type o-rings, the fuel will break down the material, and you will have leaks again.
I work for Bosch Rexroth (yes, sort of the same Bosch that makes parts our cars don't like, only I work for the hydraulics division) and I've seen first hand what catastrophies the wrong type of o-ring can cause.
Viton or Buna will be fine. You might want to call the hardware store and make sure they did NOT supply EPDM.
Sincerely,
"Lord of the O-Rings",
Adam
01-11-2007, 01:26 PM
#12
Junior Member
Thread Starter
Join Date: Jan 2007
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Hello! BillBoost37
I removed the O-Rings with a pick from the female side,the clip stayed on the male or tubing.
There were 2 o-rings, a Yellow one in the innermost part of the female part, and a Orange o-ring that was further to the outside,they were Hell to get in and it took three attempts but I Got It!
For future info the O-rings were RA#12 at the hardware store!
Thanks Again!
I removed the O-Rings with a pick from the female side,the clip stayed on the male or tubing.
There were 2 o-rings, a Yellow one in the innermost part of the female part, and a Orange o-ring that was further to the outside,they were Hell to get in and it took three attempts but I Got It!
For future info the O-rings were RA#12 at the hardware store!
Thanks Again!
01-11-2007, 01:46 PM
#14
Junior Member
Thread Starter
Join Date: Jan 2007
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Hi! guys
I did get O-rings that are rated for fuel lines!
I live in the Country and the Hardware Store is also a Hugh old Style Auto Parts, Like we all used to have before the Discount Auto Zones and Hi-Low-OReilly'*.
The guys their actually know what they're talking about and took the time to Match up the O-rings for me!
Oh! That # was BA 12 not RA, I think :? . Oh Well, it'* fixed.
Thank for all the info and Help!
I did get O-rings that are rated for fuel lines!
I live in the Country and the Hardware Store is also a Hugh old Style Auto Parts, Like we all used to have before the Discount Auto Zones and Hi-Low-OReilly'*.
The guys their actually know what they're talking about and took the time to Match up the O-rings for me!
Oh! That # was BA 12 not RA, I think :? . Oh Well, it'* fixed.
Thank for all the info and Help!
01-11-2007, 02:52 PM
#15
DINOSAURUS BOOSTUS
Expert Gearhead
Like mentioned and you've confirmed.. We can't stress enough to all that might read this thread about ensuring the o-rings used in the fuel lines are made for fuel.
Most o-rings would be slowly eaten away by the gasoline and then a pressure leak would occur, spraying fuel all over a hot engine and exhaust.
In this case, fuel o-rings were gotten at the Auto/Hardware store.
Glad to hear you were able to get it fixed up and back on the road.
Most o-rings would be slowly eaten away by the gasoline and then a pressure leak would occur, spraying fuel all over a hot engine and exhaust.
In this case, fuel o-rings were gotten at the Auto/Hardware store.
Glad to hear you were able to get it fixed up and back on the road.
Thread
Thread Starter
Forum
Replies
Last Post
Merlin 91/97
Lounge
24
09-02-2005 09:16 PM