2 Driver Side Window Problems...
#1
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Aug 2005
Location: Michigan
Posts: 1,249
Likes: 0
Received 0 Likes
on
0 Posts
2 Driver Side Window Problems...
First problem. The window doesn't close correctly. It closes perfect until it is about 1 or 2 cm from the top then it seems to get caught on something and goes off the track and doesn;t seal correctly. The hright side ends up barly going to the seal as the left side is still exposed. In the pic below the yellow line represents the top of the window.
And two, there is this brown crap that seems like rust, but I don't see any metal. This is the driver side front window, the one between the window that rolls down and the windshield. idk what it is or how to fix it.
And two, there is this brown crap that seems like rust, but I don't see any metal. This is the driver side front window, the one between the window that rolls down and the windshield. idk what it is or how to fix it.
#2
Senior Member
Posts like a 4 Banger
Join Date: May 2005
Location: Houghton, MI
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
First: It sounds like you have a broken clip. Not sure what type these cars have (glue on or snap on). If you tear into it and find out one'* broken, make sure you check into why it broke (bent track, etc) before you just replace it, or you'll be replacing it again.
Second: I have no idea. Clean it up and see if it comes back?
Second: I have no idea. Clean it up and see if it comes back?
#3
Senior Member
Certified Car Nut
Yeah, something internal is definitely causing your window to either stick or go out of track. Could be something as simple as gunk in the track. Take the door panel off and have a look-see.
As for the second picture, it is rust. There'* a metal frame under all that trim. I got a bit of it myself.
As for the second picture, it is rust. There'* a metal frame under all that trim. I got a bit of it myself.
#5
Member
Posts like a V-Tak
Join Date: Sep 2003
Location: Ontario
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bandit
hey you have the same rust a me...
im trying to figure out how it got there...
im trying to figure out how it got there...
Thread
Thread Starter
Forum
Replies
Last Post