1997 Rusty Wheel Well
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2008
Location: Regina, Sakatchewan Canada
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
1997 Rusty Wheel Well
I am now a victim of the rusty wheel well syndrome. I talked to an autobody shop this morning and they are quoting me $600+ to repair properly. I could also patch with tin and silicone myself.
#3
Senior Member
Posts like a Turbo
Join Date: Mar 2009
Location: Clawson, Michigan
Posts: 478
Likes: 0
Received 0 Likes
on
0 Posts
you could take some self-taping screws and screw a piece of sheet metal in there and glue it as well, i did that under my rear seat ill take some pics when i get a chance
#5
Senior Member
Certified GM nut
Ouch! I've got a '97 as well, about to hit 150,000. Can't offer you any advice, but you just gave me something to check out tomorrow morning. Thanks for the heads up.
#6
Senior Member
Posts like a Turbo
Join Date: Dec 2008
Location: Mississauga Ontario
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
i bet ur trunk reeks....
knock out the rust around it and buy some aluminum tape along with some silicone and undercoat (or bedliner), buy the clear bathroom silicone and blob it around a strip of the tape and patch the bottom up. Then pull the interior carpet from the trunk so that you can get in to the well, then patch from the top. Once it all dries up undercoat the bottom patch job and your set to go.
Iv done mine months ago and theres no sign of tear, beats $600
knock out the rust around it and buy some aluminum tape along with some silicone and undercoat (or bedliner), buy the clear bathroom silicone and blob it around a strip of the tape and patch the bottom up. Then pull the interior carpet from the trunk so that you can get in to the well, then patch from the top. Once it all dries up undercoat the bottom patch job and your set to go.
Iv done mine months ago and theres no sign of tear, beats $600
#7
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2008
Location: Regina, Sakatchewan Canada
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
The really unique thing is the left side is like new, no rust period. I have an arc welder in my garage, so I may try to repair it myself. That thin auto metal is very tricky to weld.
#9
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 29 Likes
on
25 Posts
After some discussion we felt the passenger side would rust out faster because that wheel tends to drive threw more gravel being closer to the shoulder of the road.