1992 bonneville ssei starts, stalls then wont start
#34
Senior Member
True Car Nut
Originally Posted by gilligans_off
anyone have an idea on how much i should pay for a new sensor?
GM PART # 10456162
CATEGORY: Chassis Wiring & Computer Controls
GM LIST: $50.94
OUR PRICE: $26.49
#36
DINOSAURUS BOOSTUS
Expert Gearhead
Ok..that flat metal is the cam. Your cam is a gear and you see the flat part of the face right now. You need to manually turn the engine. Using a large socket and ratchet on the harmonic balancer bolt. Remove all plugs first. that will make it much easier. As the motor is being turned....look for a magnet in the cam sensor hole..or a hole missing a magnet in the cam gear.
#37
Member
Posts like a V-Tak
Thread Starter
Join Date: Apr 2006
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
well i thought i would take it for a test drive to see if there where any problems before I checked the magnet and the stupid thing died on me again... ill check the magnet and see if that needs to be replaced but if not i think im gonna cut my losses and sell this stupid car
#38
Senior Member
True Car Nut
Originally Posted by gilligans_off
well i thought i would take it for a test drive to see if there where any problems before I checked the magnet and the stupid thing died on me again... ill check the magnet and see if that needs to be replaced but if not i think im gonna cut my losses and sell this stupid car
if you sell it the way it is good luck getting more than 500-700$
#39
I believe the dampner bolt is a 24mm. Where are you at in the country. No doubt someone can visit you and help you along if you need it. Once you get it running right it'll be a good car no doubt(this is coming from a Ford guy.) Don't give up yet.
Nevermind the size I specified, thats around a L36 size.... Give or take a few MM.
Nevermind the size I specified, thats around a L36 size.... Give or take a few MM.
#40
Member
Posts like a V-Tak
Thread Starter
Join Date: Apr 2006
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
yeah it was a 24mm and the inverter is fine so now im really stuck.. ill phone my dads mechanic buddy to scan and clear the codes and go from there. but im still on my wits end here lol